Water Conditioner ~ Easy Installation Process

AquaMagna Magnetic Descaler ~ A ‘No-Salt’, Natural, Green Alternative to Conventional Water Softeners
Water Conditioner ~ Easy Installation Process
Residential Magnetic Water Conditioner - Two Part System - COLD Water & HOT Water


The residential water conditioning system comes with two sets, each consisting of two identical units. Two units clamp together on the cold water pipe and the other two units clamp together on the hot water pipe with the powerful magnetic field running along the pipe.
Placement

1. COLD WATER PIPE
Install one set (two units) on the cold water pipe, after the water meter and before the hot water tank. Always place after any electric ground wire clamp that uses the cold water line for grounding.
2. HOT WATER PIPE
Install one set on the domestic hot water outlet pipe.
Installation

STEP 1
Align two units opposing each other (units will repel). Loosely fasten bolt and wing nut through holes on one side of units. Keep loose until step 2 is completed.

STEP 2
Place set around pipe and repeat procedure in step 1 on other side. Tighten wing nuts so assembled set is secure and centered along pipe.
You are now ready to experience the free magnetic energy as it conditions your water.